jump to navigation

Integrated IP65 Stepper Motors from Applied Motion Products November 21, 2016

Posted by Servo2Go.com in New Product Press Releases.
Tags: , , , ,
add a comment
SWM Integrated IP65 Step Motors

SWM Integrated IP65 Step Motors

SWM integrated steppers from Applied Motion Products Inc. are IP65 rated drive+motor units, fusing step motor and drive components into a single splash proof and dustproof device. This space-saving design eliminates wiring and saves on cost over conventional motor and drive solutions.

The SWM24 integrated steppers combine high torque NEMA 24 step motors with a sophisticated, 6.0 A/phase (peak-of-sine) step motor drive. Power to the drive, located at the rear of the motor, must be supplied by an external DC supply. Applied Motion offers compatible 24 and 48 volt DC power supplies for exactly this purpose.

All SWM24 integrated steppers are RoHS and CE compliant.  Features include:

  • Rated IP65 for wet and dusty environments
  • M12 connectors
  • Anti-resonance
  • Torque ripple smoothing
  • Microstep emulation
  • NEMA 24 frame size
  • Stored programming option for stand-alone operation
  • Step direction, velocity and streaming command control modes
  • RS-232, Ethernet and EtherNet/IP Communication options
  • Modbus/RTU for easy communication with PLC or HMI
  • Built-in incremental encoder

CLICK HERE for more information on the SWM Integrated Stepper Motors from Applied Motion Products Inc.   For more information, please contact:

EDITORIAL CONTACT:

Warren Osak
warren@servo2go.com
Toll Free Phone:   877-378-0240
Toll Free Fax:       877-378-0249
http://www.servo2go.com

 

Tags:  SWM Series, IP65, Integrated Step Motor, Servo2Go, Applied Motion Products

Integrated IP65 Stepper Motors October 27, 2015

Posted by Servo2Go.com in New Product Press Releases.
Tags: , , , , ,
add a comment
SWM Integrated IP65 Step Motors

SWM Integrated IP65 Step Motors

SWM integrated steppers, from Applied Motion Products of Watsonville, CA, are IP65 rated drive+motor units, fusing step motor and drive components into a single splashproof and dustproof device.  This space-saving design eliminates wiring and saves on cost over conventional motor and drive solutions.

The SWM24 integrated steppers combine high torque NEMA 24 step motors with a sophisticated, 6.0 A/phase (peak-of-sine) step motor drive.  Power to the drive, located at the rear of the motor, must be supplied by an external DC supply.  Applied Motion offers compatible 24 and 48 volt DC power supplies for exactly this purpose.

All SWM24 integrated steppers are RoHS and CE compliant.

Control Options:

The SWM24 integrated steppers come with the choice of three control options: S, Q, and C.

  • The “S” control option means the drive can operate in the following control modes: step (pulse) & direction, velocity (oscillator), and streaming serial commands (SCL).  (SWM24 integrated steppers do not support stored-program operation with the Applied Motion 4-axis and 8-axis SiNet Hubs).
  • The “Q” control option means the drive can operate in all of the same control modes as the S option, plus the ability to run a Q program stored in non-volatile memory.  Q programs are created using Applied Motion’s Q Programmer™ software, which provides powerful commands for motion, I/O, conditional processing, multi-tasking, math functions, and more.
  • The “IP” control option means the drive is designed to operate on a Rockwell PLC-based EtherNet/IP communication network.

All SWM24 integrated steppers, whether they come with the S, Q, or IP control option, are setup and configured using Applied Motion’s ST Configurator™ software.

Encoder Option:

1000-line (4000 count/rev) incremental encoders are included in all SWM24 models.  The encoder is housed inside the same enclosure as the drive electronics, providing protection from dust, liquid and debris.  The addition of the encoder means the stepper can perform special functions not available otherwise.  Stall Detection notifies the system as soon as the required torque is too great for the motor, which results in a loss of synchronization between the rotor and stator, also known as stalling.  Stall Prevention actually prevents stalling of the step motor by dynamically adjusting motor speed to maintain synchronization of the rotor to the stator.  This unique feature allows step motors to operate in a much broader range of applications than previously available to step motors, such as torque-control applications.  The Stall Prevention feature also performs static position maintenance, which maintains the position of the motor shaft when at rest.

Inputs/Outputs:

The RS-232 based SWM24SF and SWM24QF model numbers come with 4 digital I/O points, called Flex I/O points, because each point can be individually defined as an input or an output.  As inputs, the Flex I/O points accept signals of 5-24 VDC and can be used for connecting pulse & direction signals, end-of-travel limit switches, jog switches, quadrature encoder signals, PLC outputs, sensors, or many other signal types.  When defined as digital outputs, the Flex I/O points can be connected to PLC inputs, counters, lights, relays, or other devices.

The Ethernet-based SWM24S, SWM24Q and SWM24IP models come with 3 digital inputs and 1 digital output.  The digital inputs accept signals of 5-24 VDC and can be used for connecting end-of-travel limit switches, jog switches, quadrature encoder signals, PLC outputs, sensors, or many other signal types.  The digital output can be connected to PLC inputs, counters, lights, relays, or other devices.

All SWM24 model numbers come with 1 analog input. The analog input accepts 0-5 VDC signals and can be used for velocity and position control.

Communication Ports:

SWM24 integrated steppers with the S and Q control options are available with either RS-232 or Ethernet ports for programming and serial communications.  For single-axis applications where no serial networking is required the RS-232 option is recommended. RS-232 version also supports Modbus/RTU communication.  For applications where communications over a network are required the Ethernet option is recommended.

Click on the following link  to view these Integrated IP65 Stepper Motor Product Information

New IP65 Rated NEMA 24 Integrated Stepper Drive+Motors March 14, 2014

Posted by Servo2Go.com in New Product Press Releases.
Tags: , , , , , , , ,
add a comment

SWM integrated steppers are IP65 rated drive+motor units, fusing step motor and drive components into a single splashproof and dustproof device.  This space-saving design eliminates wiring and saves on cost over conventional motor and drive solutions.

IP65 Integrated Step Motor

IP65 Integrated Step Motor

The SWM24 integrated steppers combine high torque NEMA 24 step motors with a sophisticated, 6.0 A/phase (peak-of-sine) step motor drive.  Power to the drive, located at the rear of the motor, must be supplied by an external DC supply.  Applied Motion offers compatible 24 and 48 volt DC power supplies for exactly this purpose.

All SWM24 integrated steppers are RoHS and CE compliant.

Features include:

  • Rated IP65 for wet and dusty environments
  • M12 connectors
  • Anti-resonance
  • Torque ripple smoothing
  • Microstep emulation
  • NEMA 24 frame size
  • Stored programming option for stand-alone operation
  • Step direction, velocity and streaming command control modes
  • RS-232, Ethernet and * EtherNet/IP Communication options
  • Modbus/RTU for easy communication with PLC or HMI
  • Built-in incremental encoder
  • Typically ships in 1 week

Control Options:

The SWM24 integrated steppers come with the choice of three control options: S, Q, and C.

  • The “S” control option means the drive can operate in the following control modes: step (pulse) & direction, velocity (oscillator), and streaming serial commands (SCL). (SWM24 integrated steppers do not support stored-program operation with the Applied Motion 4-axis and 8-axis SiNet Hubs).
  • The “Q” control option means the drive can operate in all of the same control modes as the S option, plus the ability to run a Q program stored in non-volatile memory. Q programs are created using Applied Motion’s Q Programmer™ software, which provides powerful commands for motion, I/O, conditional processing, multi-tasking, math functions, and more.
  • The “IP” control option means the drive is designed to operate on a Rockwell PLC-based EtherNet/IP communication network.

All SWM24 integrated steppers, whether they come with the S, Q, or IP control option, are setup and configured using Applied Motion’s ST Configurator™ software.

For more information on the IP65 Integrated Step Motors from Applied Motion Products, click on the link below:

https://www.servo2go.com/product.php?ID=105547&cat=

For more information, please contact:

Editorial Contact:

Warren Osak
sales@servo2go.com
Toll Free Phone:  877-378-0240
Toll Free Fax:       877-378-0249
www.servo2go.com

Tags:  Integrated Motor, Integrated Step Motor, Automation, Motion Control, Servo2Go, Applied Motion Products, IP65, Splashproof, Dustproof

IP65 Rated Step Motors Shipped In 1 Week November 25, 2013

Posted by Servo2Go.com in New Product Press Releases.
Tags: , , , , ,
add a comment

The HW Series from Applied Motion Products’ are NEMA 23 and NEMA 34 frame IP65 Rated Stepper Motors constructed for operation in severe environmental conditions.

IP65 Rated Step Motors

IP65 Rated Step Motors

These new models, dust proof and resistant to low pressure water jets, are ideal for applications in wet factory environments such as the food and beverage industry or outdoor use.  Key features include a nickel plated brass cable gland, sealed laminations, a front shaft contact seal and an optional IP65 rated encoder cover for use with products that require feedback.  All models have an internal corrosion-resistant film coating as standard.  For improved protection in high-humidity environments an advanced coating is available as an option.

IP65 specifies a product that is dust tight (no ingress of dust; complete protection against contact) and protected against water jets (water projected by a nozzle from any direction shall have no harmful effects).

More information on the IP65 Rated Step Motors from Applied Motion Products can be found at the link below-

http://www.servo2go.com/search.php?search=HW&D=PROD

For more information, please contact:

Editorial Contact:

Warren Osak
sales@servo2go.com
Toll Free Phone:  877-378-0240
Toll Free Fax:   877-378-0249
www.servo2go.com

 

Tags:  IP65, Step Motor, Stepper Motor, Applied Motion Products, Servo2Go, Stepper Systems