jump to navigation

Servo-Tek DC Tachometers for Industrial and Instrument Applications June 22, 2012

Posted by Servo2Go.com in New Product Press Releases.
Tags: , , ,
trackback
Servo-Tek CS-7514F-51C DC Tachometer

Servo-Tek CS-7514F-51C DC Tachometer

Servo-Tek Tach Generators provide a convenient means of converting rotational speed into an isolated analog voltage signal suitable for remote indication and control applications.

Combining high accuracy with low driving torque, Servo-Tek tach generators are ideal for use in servo systems.  Tach Generators are particularly suited to application in precision integrators and velocity servos, both of which require a highly linear speed/voltage relationships with minimum ripple.  DC Tachometer Generators are also excellent rate generators for velocity damping in position servos.   Features include:

Speed Transducers/DC Tach Generator
The nearly pure dc output-with no phase shift-allows Servo-Tek Tach Generators to be used as feedback transducers for numerous types of equipment, including fast-response servos and other devices.

Tach Generator Construction
Servo-Tek Tach Generators are housed in aluminum casings protected in accordance with Mil-C-5541 or Mil-A-8625. Alnico permanent magnets are used. Armature shafts are stainless steel, and rotate on fully-shielded stainless steel ball bearings. Commutators are made from an alloy containing 95% silver. Armature laminations are wound with Isomid insulated wire, over Teflon slot insulation. The entire armature is impregnated and baked, resulting in a NEMA Class H insulation system.

Brush Life
Tachometer Generator brushes and commutators are matched for long life and stability. Operation at 1 mA output will deliver maximum brush life.

Linearity
Linearity, of Servo-Tek DC Tach Generators, at any speed is better than 0.1% of the output at that rpm.

Ripple
The DC Tachometer Generator ripple rms value will not exceed 3% of the dc value at any speed in excess of 40 rpm on standard units; 1.5% on low-ripple models. 

Bidirectional Operation
All Servo-Tek DC Tach Generators operate in either rotational direction. That direction can be determined by output voltage polarity. Output (in either direction) is held to a tolerance of 0.25% of the average output.

Stability
Optimum brush and commutator combination gives 0.1% stability. Highly stable output gives no evidence of long-term drift.

Temperature Range
Tachometer Generators are designed for continuous operation in ambient temperatures ranging from -55°C to +100°C(-67°F to +212°F). Voltage output at 25°C will not deviate by more than 0.01% per degree of change within the range of -20°C to +75°C.  All Tachs are temperature compensated, with the exception of Series D and E.

For more information on the DC Tachometers from Servo-Tek, click on the link below:

http://servo2go.com/supplier.php?id=1031080133

For more information, please contact:

Editorial Contact:

Warren Osak sales@servo2go.com
Toll Free Phone:  877-378-0240
Toll Free Fax:       877-378-0249
www.servo2go.com

Advertisements

Comments»

No comments yet — be the first.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: